HELI G Series CPCD50-C1Z-061IIG Internal Combustion Counterbalanced Forklift

Energy saving and environmental protection

The cooling system adopts pressure motor driven fan technology, and the motor displacement is adjustable. The controller reads several temperature control signals (such as engine water temperature signals) that need to be collected from the CAN bus. For each temperature signal, according to the vehicle’s heat dissipation requirements and the characteristics of the temperature signal, the starting temperature and target temperature are reasonably set. The controller calculates the fan speed requirements corresponding to several temperature signals separately, and takes the fan speed requirement corresponding to the temperature signal with the largest demand as the effective value, thereby realizing automatic adjustment of the cooling system fan speed.

1. Intelligent sensitive thermal management system: The composite radiator is placed obliquely above the tail frame, and the air duct does not pass through the inside of the vehicle body, which can reduce the possibility of paper scraps, dust, etc. accumulating inside the vehicle body with the air duct;

2. Intelligent sensitive thermal management system: The system has high heat dissipation efficiency and can effectively control the temperature of the engine intake air, coolant, transmission oil, and hydraulic oil, so that the whole vehicle is in the best working state;

Safe and reliable

3. Meritor wet drive axle: Braking is safe and reliable, meeting the needs of long-term, high-intensity, short-distance, and frequent braking operations;

4. Imported German ZF gearbox: Full hydraulic gearbox, using intelligent shifting mode, meeting the needs of frequent switching of forward and reverse gears, safe and reliable;

5. Cummins 6.7 fully imported engine: powerful and reliable, and can respond quickly to throttle operation. Fast speed increase, can meet the needs of rapid transportation;

6. The hydraulic system adopts Parker’s quantitative system: the hydraulic system operates reliably and quickly;

7. Improvement of the strength of the gantry and frame structure: long-term market verification and experience accumulation of heavy-duty forklifts, the use of high-strength plates in key parts, and the optimization of the gantry frame structure make the structural parts more solid and durable;

8. Separate layout of pipes and lines: the layout principle of wires on top and pipes on the bottom, the wiring harness adopts German standards, and the temperature resistance limit is greatly improved (-40℃-105℃);

9. The electrical cabinet and battery are arranged in a built-in style: the sealing effect is better, and it is not easy to be scratched or smashed by falling objects from high altitude.

Operation comfort

10. Electric tilting cab: daily inspection and maintenance are more convenient;

11. Better operation vision and ergonomics in the cab: the cab is equipped with large-area multi-directional glass, which provides better operation vision; the layout of the operating table, seats, etc. in the cab has been ergonomically optimized and the relative position is adjustable, which reduces the fatigue intensity of employees working for a long time;

12. Flexible control handle: precise, safe and effective control can be achieved with less control force, and linkage operation can be realized;